Federal Communications Commission Radio Frequency Interference Statement; Canadian Department Of Communications Radio Interference Statement - Ithaca PcOS series 90plus Maintenance Manual

Federal Communications Commission Radio Frequency Interference
Statement
The Series 90PLUS printer complies with the limits for a Class A computing device, in accordance with the
specifications in Part 15 of the FCC rules, which are designed to minimize radio frequency interference during
installation. However, there is no guarantee that radio or television interference will not occur in any particular
installation. If the equipment does cause interference to radio or television reception, which can be determined
by turning the equipment off and on while the radio or television is on, the user is encouraged to try to correct
the interference by one or more of the following measures:
♦
Reorient the radio or television receiving antenna;
♦
Relocate the printer with respect to the receiver; or
♦
Plug the printer and receiver into different outlets.
If necessary, the user should consult their dealer or an experienced radio/television technician for additional
suggestions.
The user may find the following booklet prepared by the Federal Communications Commission helpful: How to
Identify and Resolve Radio/TV Interference Problems. This booklet is available from the United States
Government Printing Office, Washington, DC 20402. Ask for stock number 004-000-00345-4.

Canadian Department of Communications Radio Interference Statement

The Series 90PLUS printer does not exceed Class A limits for radio noise emissions from digital apparatus set
out in the Radio Interference Regulations of the Canadian Department of Communications.
UL, CSA, VDE, CE Statement
Ithaca Peripherals' printers are UL and CSA listed, VDE certified, and carry the CE mark.