Installation Cautions - Yamaha MCX-CA15 Owner's Manual

I
INSTALLATION CAUTIONS
This manual describes the installation procedures for both the MCX-ClS Distributed Audio Controller and
MCX-CA15 Distributed Audio Amplifier.
Make sure you read the following cautions before proceeding to install these units.
• These units must be installed by a
qualified technician. Do not attempt to
install these units yourself.
• Complete all other connections before
connecting to a live power source.
• The AC adaptor must be positioned so
that the power plug can be unplugged
easily.
• Depending on the installation
configuration method used, additional
items may be required. Any additional
items must be purchased prior to
installation.
Be sure to leave 10 cm of ventilation
space to the top, bottom, left and right of
these units, and remove all insulating
materials, etc. If a support beam
prevents adequate clearance around
these units, make sure that sufficient
space is cleared on the opposite side of
the support beam.
• Avoid installing these units where
foreign objects may fall onto these units
and/or these units may be exposed to
liquid dripping or splashing. On the top
of these units, do NOT place:
- Other components, as they may
cause damage and/or discoloration
on the surface of these units.
- Burning objects (Le. candles), as they
may cause fire, damage to these
units, and/or personal injury.
- Containers with liquid in them, as
they may fall and liquid may cause
electrical shock to the user and/or
damage to these units.
2
Do not cover these units with a
newspaper, tablecloth, curtain, etc. in
order not to obstruct heat radiation. If the
temperature inside these units rises, it
may cause fire, damage to these units,
and/or personal injury.
• Do not operate these units upside-down.
They may overheat, possibly causing
damage.
• When disconnecting the power cord
from the wall outlet, grasp the plug; do
not pull the cord.
• To prevent damage by lightning,
disconnect the power cord from the wall
outlet during an electrical storm.
• When not planning to use these units for
long periods of time (i.e. when going on
vacation), disconnect the AC power plug
from the wall outlet.
• Before moving these units, press
0/1 on
the MCX-C15 to place them in the sleep
mode, and disconnect the AC power plug
from the wall outlet.
Be sure to use the AC adaptor
(LSE0215C1240) supplied with the
MCX-C15. Using an AC adaptor other
than the one provided may cause fire or
damage to these units.
• These units are designed for home use
only. Never use these units in a car, etc.
Doing so may cause these units to
malfunction.
I
INSTALLATION CAUTIONS
This manual describes the installation procedures for both the MCX-ClS Distributed Audio Controller and
MCX-CA15 Distributed Audio Amplifier.
Make sure you read the following cautions before proceeding to install these units.
• These units must be installed by a
qualified technician. Do not attempt to
install these units yourself.
• Complete all other connections before
connecting to a live power source.
• The AC adaptor must be positioned so
that the power plug can be unplugged
easily.
• Depending on the installation
configuration method used, additional
items may be required. Any additional
items must be purchased prior to
installation.
Be sure to leave 10 cm of ventilation
space to the top, bottom, left and right of
these units, and remove all insulating
materials, etc. If a support beam
prevents adequate clearance around
these units, make sure that sufficient
space is cleared on the opposite side of
the support beam.
• Avoid installing these units where
foreign objects may fall onto these units
and/or these units may be exposed to
liquid dripping or splashing. On the top
of these units, do NOT place:
- Other components, as they may
cause damage and/or discoloration
on the surface of these units.
- Burning objects (Le. candles), as they
may cause fire, damage to these
units, and/or personal injury.
- Containers with liquid in them, as
they may fall and liquid may cause
electrical shock to the user and/or
damage to these units.
2
Do not cover these units with a
newspaper, tablecloth, curtain, etc. in
order not to obstruct heat radiation. If the
temperature inside these units rises, it
may cause fire, damage to these units,
and/or personal injury.
• Do not operate these units upside-down.
They may overheat, possibly causing
damage.
• When disconnecting the power cord
from the wall outlet, grasp the plug; do
not pull the cord.
• To prevent damage by lightning,
disconnect the power cord from the wall
outlet during an electrical storm.
• When not planning to use these units for
long periods of time (i.e. when going on
vacation), disconnect the AC power plug
from the wall outlet.
• Before moving these units, press
0/1 on
the MCX-C15 to place them in the sleep
mode, and disconnect the AC power plug
from the wall outlet.
Be sure to use the AC adaptor
(LSE0215C1240) supplied with the
MCX-C15. Using an AC adaptor other
than the one provided may cause fire or
damage to these units.
• These units are designed for home use
only. Never use these units in a car, etc.
Doing so may cause these units to
malfunction.