Yamaha MCX-CA15 Owner's Manual page 40

BEFORE USING THE MusicCAST SYSTEM
After installation of the MCX-CI5 is complete, you
must upgrade the MusicCAST system firmware on
the MCX-I000 (hereafter, "the server") using the
Upgrade CD-ROM (MusicCAST Software Version
Up Disc Vol. 2.1 Including MCX-CI5 Connectivity)
provided with the MCX-C 15 (hereafter, "the
client").
CAUTION
If the MusicCAST firmware is not upgraded,
your client may not function correctly.
Before upgrading the MusicCAST system
firmware, be sure to stop playback on all
MusicCAST clients connected to the server.
For information on function upgrades for the
server, see the Version Upgrade Manual Vol. 2
available on the Owner's Manual CD-ROM
provided with the client.
If an MCX-AI0 client (wireless/wired type) is
connected to the MusicCAST system, it must
also be upgraded. For details, see the Version
Upgrade Manual Vol. 2 available on the Owner's
Manual CD-ROM provided with the client.
Server operation:
1
Press TOP MENU on the server.
2
Press A/ v to choose "System Setup"
and press SELECT.
3
Press
A/
v to choose "System
Utilities" and press SELECT.
4
Press
A/ v
to choose "System
Update" and press SELECT.
The System Update screen appears.
5
Press OPEN/CLOSE to open the disc
tray, and insert the Upgrade CD-ROM
(MusicCAST Software Version Up Disc
Vol. 3).
6
Press OPEN/CLOSE to close the disc
tray.
The server automatically checks the content of
the upgrade CD-ROM, and the message
"Update CD is ready" appears on the on-screen
display.
7
Press SELECT.
The message "READING" appears on the
on-screen display.
After the upgrade CD-ROM is read, the
message "UPDATE OK" appears in the lower
left corner of the screen.
8
Press OPEN/CLOSE to open the disc
tray and remove the upgrade CD-ROM,
then press STANDBY/ON.
The MusicCAST server switches to standby
mode.
9
Press STANDBY/ON once again to turn
on the server.
The upgrade process is complete.
• If the message "Update CD is ready" does not
appear on the display, press OPEN/CLOSE to
eject the upgrade CD-ROM and reload it in the
disc tray. If the message does not appear after
reloading the CD-ROM, contact the store of
purchase or your nearest YAMAHA dealer.
• Depending on the version currently installed on
your server and MCX-AI0 client, you may need
to upgrade the MusicCAST system firmware
more than once.
19
BEFORE USING THE MusicCAST SYSTEM
After installation of the MCX-CI5 is complete, you
must upgrade the MusicCAST system firmware on
the MCX-I000 (hereafter, "the server") using the
Upgrade CD-ROM (MusicCAST Software Version
Up Disc Vol. 2.1 Including MCX-CI5 Connectivity)
provided with the MCX-C 15 (hereafter, "the
client").
CAUTION
If the MusicCAST firmware is not upgraded,
your client may not function correctly.
Before upgrading the MusicCAST system
firmware, be sure to stop playback on all
MusicCAST clients connected to the server.
For information on function upgrades for the
server, see the Version Upgrade Manual Vol. 2
available on the Owner's Manual CD-ROM
provided with the client.
If an MCX-AI0 client (wireless/wired type) is
connected to the MusicCAST system, it must
also be upgraded. For details, see the Version
Upgrade Manual Vol. 2 available on the Owner's
Manual CD-ROM provided with the client.
Server operation:
1
Press TOP MENU on the server.
2
Press A/ v to choose "System Setup"
and press SELECT.
3
Press
A/
v to choose "System
Utilities" and press SELECT.
4
Press
A/ v
to choose "System
Update" and press SELECT.
The System Update screen appears.
5
Press OPEN/CLOSE to open the disc
tray, and insert the Upgrade CD-ROM
(MusicCAST Software Version Up Disc
Vol. 3).
6
Press OPEN/CLOSE to close the disc
tray.
The server automatically checks the content of
the upgrade CD-ROM, and the message
"Update CD is ready" appears on the on-screen
display.
7
Press SELECT.
The message "READING" appears on the
on-screen display.
After the upgrade CD-ROM is read, the
message "UPDATE OK" appears in the lower
left corner of the screen.
8
Press OPEN/CLOSE to open the disc
tray and remove the upgrade CD-ROM,
then press STANDBY/ON.
The MusicCAST server switches to standby
mode.
9
Press STANDBY/ON once again to turn
on the server.
The upgrade process is complete.
• If the message "Update CD is ready" does not
appear on the display, press OPEN/CLOSE to
eject the upgrade CD-ROM and reload it in the
disc tray. If the message does not appear after
reloading the CD-ROM, contact the store of
purchase or your nearest YAMAHA dealer.
• Depending on the version currently installed on
your server and MCX-AI0 client, you may need
to upgrade the MusicCAST system firmware
more than once.
19