Yamaha MCX-CA15 Owner's Manual page 83

TROUBLESHOOTING
Problem Cause Remedy Refer to
page
The client does
The volume setting of the Increase the volume setting. Quick
not output any
client is low. Manual,
sound.
page 9
The speakers are not correctly
Check the connections between
11
connected to the MCX-CAI5. the speakers and the MCX-CAI5.
The "Amplifier" menu settings Make sure the name of the
MCX-CI5
on the client are incorrect. receiver connected to the client is Owner's
set correctly in the "Amplifier" Manual,
menu. page 43
Playback from The network is extremely Place your clients under an
the client skips. congested. independentsubnetmask, or
-
upgrade your network hardware.
The STATUS The cables are not connected Connect the cables correctly.
indicator on the correctly. When using the MCX-CAI5 in
front panel of the MusicCAST system, press
the MCX-CA15
(9/1
on the client for 10 seconds
flashes rapidly.
to reset the system.
6
When using the MCX-CA 15 as
an amplifier for another system,
press RESET on the inside front
panel of the MCX-CA 15 to reset
this unit.
You are using low-impedance Use speakers with an impedance
speakers. of at least 4
Q .
When using the MCX-CAI5 in
the MusicCAST system, press
(9/1
on the client for 10 seconds
to reset the system.
6
When using the MCX-CAI5 as
an amplifier for another system,
press RESET on the inside front
panel of the MCX-CA15 to reset
this unit.
29
TROUBLESHOOTING
Problem Cause Remedy Refer to
page
The client does
The volume setting of the Increase the volume setting. Quick
not output any
client is low. Manual,
sound.
page 9
The speakers are not correctly
Check the connections between
11
connected to the MCX-CAI5. the speakers and the MCX-CAI5.
The "Amplifier" menu settings Make sure the name of the
MCX-CI5
on the client are incorrect. receiver connected to the client is Owner's
set correctly in the "Amplifier" Manual,
menu. page 43
Playback from The network is extremely Place your clients under an
the client skips. congested. independentsubnetmask, or
-
upgrade your network hardware.
The STATUS The cables are not connected Connect the cables correctly.
indicator on the correctly. When using the MCX-CAI5 in
front panel of the MusicCAST system, press
the MCX-CA15
(9/1
on the client for 10 seconds
flashes rapidly.
to reset the system.
6
When using the MCX-CA 15 as
an amplifier for another system,
press RESET on the inside front
panel of the MCX-CA 15 to reset
this unit.
You are using low-impedance Use speakers with an impedance
speakers. of at least 4
Q .
When using the MCX-CAI5 in
the MusicCAST system, press
(9/1
on the client for 10 seconds
to reset the system.
6
When using the MCX-CAI5 as
an amplifier for another system,
press RESET on the inside front
panel of the MCX-CA15 to reset
this unit.
29