Allied Telesis AT-FS7016 Installation Manual page 32

Troubleshooting
If you are unable to establish a local management session with the switch
through the RS-232 terminal port, do the following:
Check to be sure that the RS-232 cable is securely connected to the
RS-232 terminal port on the switch and to the RS-232 port on the
terminal or PC.
Check to be sure that you are using a straight-through RS-232 cable.
Do not use a cross-over cable.
Check to be sure that the operating parameters on the terminal or
terminal emulation program, if you are using a PC, have been set
correctly. Refer to "RS-232 Terminal Port" on page 6 for the default
settings.
If you are still experiencing problems after testing and troubleshooting the
installation, contact Allied Telesyn Technical Support for assistance. Refer to
"Contacting Allied Telesyn" on page viii or visit our web site at
www.alliedtelesyn.com for support information.
22