Elo TouchSystems ET7001LT User Manual page 19

OSD menu: The Horizontal position, vertical position and OSD timer can be
changed from here.
Language Settings can be changed
Recall Defaults: set the system back to the preset standards
Information: display information about the monitor and system
MDC Protocol: allows the user to choose between DDC/CI and RS232 mode for
the MDC utility
Other Settings
Support & Help: Provide information about help and support
System Temperature: Provides the system Temperature information. If the Elo
computer module is inserted, there will be a secondary line showing that
temperature information.
Power Behavior: See section below for power behavior information
Video Port Discovery (only for 7001LT): If enabled, the monitor will automatically
switch video ports when a new video signal is detected.
Adjusts how long a period of OSD button inactivity the Touchmonitor will wait before
OSD Timer closing the OSD. The adjustable range is between 5 and 60 seconds.
Default: 15 seconds
Selects which language the OSD information is displayed in. The available
languages are: English, French, Italian, German, Spanish, Simplified Chinese,
OSD Language
Traditional Chinese, and Japanese.
Default: English.
Moves the OSD location left and right on the display.
OSD H-Position
Default: 50 (centered)
Moves the OSD location up and down on the display.
OSD V-position
Default: 50 (centered)
Selecting "Recall Defaults" restores all factory default settings for OSD-adjustable
Recalling
parameters (except OSD Language and OSD Position) and for Preset Video Mode
Defaults
timings.
When power to the monitor is lost and regained, the behavior that is chosen will be
executed.
Power Behavior
Always On
Always Off
Last State
This menu allows the user to switch between the serial protocol and the DDC/CI
MDC Protocol protocol.
DDC/CI protocol is used to communicate to a host computer via the video signal.
Tabletop
Enables or disables the Tabletop Thermal Protection Mode settings
Displays Monitor Information, System Temperature and Help & Support options.
Information
Nothing is adjustable in this menu.
Monitor Displays the touchmonitor model and the monitor and touchscreen serial #
Information
information
Displays the real-time temperature of the Video Board
System
Note: Docking Board and the CPU Sensor temperatures are only available if these
Temperature
features are supported by the computer module.
Help & Support Display information regarding Elo Touch Solutions contact information.
All touchmonitor adjustments made through the OSD are automatically memorized as soon as
they are entered. This feature saves you from having to reset your choices every time the
touchmonitor is unplugged or powered off and on or if there is a power failure.
User Manual: Interactive Digital Signage
SW601990 Rev J, Page 19 of 37