What's In The Carton; Tools You Will Need; Before Getting Started - Friedrich Breeze BRO412W1A Installation Instructions Manual

What's in the carton?

1. Breeze indoor module with 25 ft. connecting
line attached
2. Wall mounting bracket for indoor module
3. Breeze outdoor module
4. Outdoor module connection covers
5. Mounting pad for outdoor module
6. Remote control

Tools you will need:

• Phillips screwdriver
• 7/16" wrench or crescent wrench
• Drill with phillips bit and 1/8" drill bit
• Stud finder (recommended)
• 3" hole saw (through wall installations)
• Safety glasses (recommended)

Before getting started

Identify the locations where you will mount the
indoor module and place the outdoor module. Keep
in mind there is 25' of connection line for connecting
indoor and outdoor pieces, so locate them accord-
ingly. You cannot add additional length if they are
too far apart.
Placing the indoor unit
It is recommended that you install the indoor module on
an exterior wall within 6 feet of a properly rated outlet
for the system you are installing. The BR0412W1A plugs
into a 115V 15A outlet. The system should be plugged
into a single circuit outlet only. Typically, hanging the
indoor module above or adjacent to a window will
provide a great location. NOTE: You should not drill
through the window header (part of the rough framing(
located directly above the window opening.
Placing the outdoor unit
The outdoor module should be placed on a level surface
with adequate clearance of items like shrubbery, solid
fencing or other air conditioning equipment that can
impede airflow to the module.
The outdoor module must be at least 12" from the wall
for proper airflow. The mounting pad provided with the
system will raise the module off of the ground 3". The
fan should face away from the building.
ITEM PART NUMBER DESCRIPTION
1 68800065 CONDENSER PAD INSTALLATION SCREW
2 68800066 SCREW #8 X 5/8" TRUSS HEAD
3 68800085 SCREW #8 X 1 1/2" PHILLIPS PAN HEAD
4 68800086 WALL ANCHOR FOR #8 SCREW
5 68800061 SLEEVE HOLD DOWN CLAMP
6 68800067 WALL OPENING FILL GASKET
7 91100804 WASHER FLAT .312 ID X .875 OD X .078 T
8 68800033 BRACKET CONTROL PANEL COVER
9 68800117 TOOL LINESET BENDING
10 1351156 WIRE TIE
9
NOTE:
Be sure to place your
equipment with these
limitations in mind.
25 ft.
connecting
line
6 ft. power
cord
25 ft. max.
12" minimum
clearance
DO NOT PLUG IN INDOOR UNIT until you have
completed the entire installation process.
REVISION NUMBER
00
00
00
00
00
00
00
00
00
00
3
1
5
6
8
6 ft.
power
cord
QTY
4
6
15
15
5
2
4
1
1
2
4
7
2
10