Step 4 Line Set Installation - Friedrich Breeze BRO412W1A Installation Instructions Manual

Table of Contents

Option 2: Window Installation Using Friedrich SimpleSill™

A. With the window raised, place one end of the SimpleSill™ into the window opening so it is against the corner of the

window frame and sill. Raise the other side of the SimpleSill™ 4" above the window sill. Expand the SimpleSill™ the

width of the window and install the securing pin as shown. Next, press the raised side down until the SimpleSill™ is

lodged securely into position. The SimpleSill™ end gaskets will conform to the window track shape.

B. Remove the pass through cover securing pins and cover.

C. Reference Step 4.2 and pass the connecting line out the window and insert it into the connecting line form in the

SimpleSill™.

D. Replace the pass through cover and securing pins

STEP 4 Line set installation

4.1 Option 1 (3" hole pass through)

Completely uncoil the line set as straight as possible. Starting

with the quick connect end of the line set, pass the entire length

through the 3" hole.

4.2 Option 2 (SimpleSill window installation)

Uncoil enough of the line set to completely pass through the

SimpleSill. Pre bend the line set using the enclosed template

to match the desired shape as it passes through the SimpleSill.

Place remaining coiled line set outside the window for later con-

nection to the Outdoor unit.

STEP 5

Hang the indoor module on the wall bracket.

Hang the module at the top first and rotate it down until the module

is level with the wall. (You may need to make adjustments to the con-

necting line to get the indoor module to mount cleanly) The Breeze

module is not designed to mount totally flush to the wall. A space of

1/8" to 3/8" may be present between the module and the wall.

STEP 6

Place the mounting pad.

Position the mounting pad so that the mounting holes are away from

the house. Set the outdoor module on the mounting pad so that the

module feet align with the mounting holes. Screw the outdoor mod-

ule to the mounting pad with the 4 lag bolts provided.

Table of Contents

Show Quick Links

Table of Contents