Soft Switch - Yamaha RX-Z9 Service Manual

RX-Z9/DSP-Z9

20. SOFT SWITCH

It is possible to change various settings by using the soft-
ware switch.
(The "STRAIGHT" key operates the toggle for changing each
item setting.)
The operation is specified by the P.C.B.
port setting.
The setting can be changed ignoring the
P.C.B. port setting.
* In order to make the software switch valid, select "RE-
SERVED" (initialization of memory) from DIAG menu No.18
PRESET and after turning off the power (standby state) once,
turn it on again. To make it invalid, disconnect the AC plug
(resetting CPU).
Selection of model
Select DSP-Z9 or RX-Z9.
Selection of destination
Select J, UC, R, TK, A or BG.
Selection of tuner tuning frequency step
The frequency step can be changed by
using the destination display.
Select J, UC or A. (RSV for no care)
Selection of existence of tuner
Select EXIST or NOT.
Do not use the "EXIST" setting for the
model not equipped with a tuner (DSP-Z9).
Selection of existence of AAC decoder function
Select EXIST or NOT.
66
20.SOFT SWITCH
SW
20.SOFT SWITCH
SW
Valid/invalid of the software switch is selected by the toggle
operation of the "STRAIGHT" key.
Display examples
20.SOFT SWITCH
MODEL:DSP-Z9
20.SOFT SWITCH
DEST :BG
20.SOFT SWITCH
TSTEP:A
20.SOFT SWITCH
TUNER:NOT
20.SOFT SWITCH
AAC
:PCB
:SOFT
:NOT