Removal Of Power Transformer; Removal Of Sub Trans P.c.b. - Yamaha RX-Z9 Service Manual

9. Removal of Power Transformer

@7
a. Remove 1 bolt ( ) and then remove the Support
(TRUP). (Fig. 12)
@8
b. Remove 2 screws ( ) and then remove the Support
(Top). (Fig. 12)
@6
c. Remove 3 screws ( ) and 3 screws (
d. Remove the wire connector. (Fig. 12)
e. Remove the Power Transformer. (Fig. 12)
10. Removal of SUB TRANS (3) P.C.B.
a. Remove the Amp Unit L/R. (See procedure 6)
b. Remove the Power Transformer. (See procedure 9)
#0
c. Remove 4 screws ( ). (Fig. 13)
#1
d. Remove 2 screws ( ). (Fig. 13)
e. Remove connector CB905 (7P). (Fig. 13)
f. Remove the SUB TRANS (3) P.C.B. (Fig. 13)
@7
@8
@9 @6
). (Fig. 12)
#0
#1
30
30 30
30
31
Fig. 13
RX-Z9/DSP-Z9
@9
31
21