Yamaha RX-Z9 Service Manual page 31

• Using the tag No.8 cable, extend SUB TRANS (4) P.C.B.
W862 and connect it to VIDEO TOP P.C.B. CB20.
• Using the tag No.6 cable, extend FUNCTION P.C.B. W6
and connect it to VIDEO TOP P.C.B. CB23.
• Using 3 tag No.5 cables, extend FUNCTION P.C.B. W7
and connect it to VIDEO TOP P.C.B. CB24.
• Using the card power cable 30P, 450mm, connect OPERA-
TION (1) P.C.B. CB904 and VIDEO TOP P.C.B. CB14. (*1)
The POWER (1) P.C.B. W908 can be connected to VIDEO
TOP P.C.B. CB26 without being extended.
The FUNCTION P.C.B. W13 can be connect to VIDEO TOP
P.C.B. CB18. (U, C, A models)
*1
When extending the card power cable, it is recommended to
prepare 2 VQ04590 FFC connectors and solder the terminals
as shown in Fig. 34 and 35.
Fig. 34
RX-Z9/DSP-Z9
Fig. 35
31