Removal Of Dc Fan Motor; Removal Of Rear Panel Unit - Yamaha RX-Z9 Service Manual

RX-Z9/DSP-Z9

14. Removal of DC Fan Motor

a. Remove the Bottom Cover. (See procedure 4)
b. Remove the Side Frame L/R. (See procedure 5)
c. Remove the Sub Chassis Unit. (See procedure 12)
d. Disconnect the following connectors.
$6
e. Remove 8 screws (
Motors. (Fig. 21)

15. Removal of Rear Panel Unit

a. Remove the Bottom Cover. (See procedure 4)
b. Remove the Side Frame L/R. (See procedure 5)
$7
c. Remove 3 screws (
$8
d. Remove 2 screws (
e. Disconnect the following connectors.
f. Remove the Rea Panel Unit. (Fig. 22)
26
) and then remove the DC Fan
). (Fig. 21)
). (Fig. 22)
46
47
47
$6
$7
$8
46
Fig. 21
47 46