Front Panels - Yamaha RX-Z9 Service Manual

Caution:
1. As the melting point temperature of the lead free solder is
about 30°C to 40°C (50°F to 70°F) higher than that of the
lead solder, be sure to use a soldering iron suitable to
each solder.
2. If lead solder must be used, be sure to remove lead-free
solder from each terminal section of the parts to be re-
placed and from the area around it completely before sol-
dering, or make sure that the lead free solder and lead
solder melt together fully.

FRONT PANELS

RX-Z9
DSP-Z9
RX-Z9/DSP-Z9
3