Table of Contents
Advertisement
2.7 Jumper Setup
he illustration shows how jumpers are setup. When the jumper cap is placed on
the pins, the jumper is "Short". If no jumper cap is placed on the pins, the jumper
is "Open". he illustration shows a 3-pin jumper whose pin1 and pin2 are "Short"
when a jumper cap is placed on these 2 pins.
ME Recovery Jumper
(3-pin ME_RECOVERY1)
(see p.6, No.22)
PSU Jumper
(9-pin PSU Jumper)
(see p.6, No.4, 5, and 6)
Normal Mode (Default)
PSU_SMBus loads the data
via PCH chip
E3C224D4M-16RE
ME Recovery Mode
PSU_SMBus loads the data
via BMC chip (Default)
19
Advertisement
Table of Contents
