Jumper Setup - ASROCK AM5D4ID-2I/BCM User Manual

2.7 Jumper Setup

The illustration shows how jumpers are setup. When the jumper cap is placed on the pins,
the jumper is "Short". If no jumper cap is placed on the pins, the jumper is "Open". The
illustration shows a 3-pin jumper whose pin1 and pin2 are "Short" when a jumper cap is
placed on these 2 pins.
Chassis ID Jumper
(3-pin CHASSIS_ID0)
(see p.6, No. 26)
Descriptor Security Over-
ride
AM5D4ID-2T/BCM
AM5D4ID-2L+/BCM
Not Override (Default)
23