2.5 Jumper Setup
The illustration shows how jumpers are setup. When the jumper cap is placed on
the pins, the jumper is "Short". If no jumper cap is placed on the pins, the jumper
is "Open". The illustration shows a 3-pin jumper whose pin1 and pin2 are "Short"
when a jumper cap is placed on these 2 pins.
ME Recovery Jumper
(3-pin ME_RECOVERY1)
(see p.6, No. 21)
CPU PECI Mode Jumper
(3-pin PECI1)
(see p.6, No. 27)
CHASSIS ID Jumper
(3-pin CHASSIS_ID0)
(see p.6, No. 24)
Normal Mode (Default)
CPU PECI connected to PCH CPU PECI connected to
Board Level SKU (Default)
D1622D4I / D1600D4I-2L2T
ME Recovery Mode
BMC (Default)
Reserved for system level use
17