ASROCK E35LM1 User Manual
  1. Manuals
  2. Brands
  3. ASROCK Manuals
  4. Motherboard
  5. E35LM1
  6. User manual
ASROCK E35LM1 User Manual

ASROCK E35LM1 User Manual

Hide thumbs Also See for E35LM1:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Installation Manual
Enlarged version
E35LM1

User Manual

Version 1.0
Published March 2012
Copyright©2012 ASRock INC. All rights reserved.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the E35LM1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for ASROCK E35LM1

Summary of Contents for ASROCK E35LM1

  • Page 1: User Manual

    E35LM1 User Manual Version 1.0 Published March 2012 Copyright©2012 ASRock INC. All rights reserved.

  • Page 2: Copyright Notice

    fi tness for a particular purpose. In no event shall ASRock, its directors, offi cers, employees, or agents be liable for any indirect, special, incidental, or consequential damages (including damages for loss of profi...

  • Page 3: Table Of Contents

    2.2 Pre-installation Precautions ......... 14 2.3 Installation of Memory Modules (DIMM) ......15 2.4 Expansion Slot ........16 (PCI Express Slot) 2.5 ASRock Smart Remote Installation Guide ..... 17 2.6 Jumpers Setup ............19 2.7 Onboard Headers and Connectors ......20 2.8 Serial ATA3 (SATA3) Hard Disks Installation...
  • Page 4 3 UEFI SETUP UTILITY ..........28 3.1 Introduction ..............28 3.1.1 UEFI Menu Bar ............ 28 3.1.2 Navigation Keys ........... 29 3.2 Main Screen ..............29 3.3 OC Tweaker Screen ............30 3.4 Advanced Screen ............33 3.4.1 CPU Confi guration ..........34 3.4.2 North Bridge Confi...

  • Page 5: Introduction

    In case any modifi cations of this manual occur, the updated version will be available on ASRock website without further notice. You may fi nd the latest VGA cards and CPU support lists on ASRock website as well.

  • Page 6: Specifi Cations

    Specifications Platform - Mini-ITX Form Factor: 6.7-in x 6.7-in, 17.0 cm x 17.0 cm - AMD Zacate E-240 APU - Supports AMD’s Cool ‘n’ Quiet Technology - UMI 2.5 GT/s Chipset - AMD A50M Chipset Memory - 2 x DDR3 DIMM slots - Supports DDR3 1333(OC)/1066/800 non-ECC, un-buffered memory - Max.
  • Page 7 / Vista 64-bit / XP / XP 64-bit compliant (see CAUTION 14) Certifi cations - FCC, CE, WHQL - ErP/EuP Ready (ErP/EuP ready power supply is required) (see CAUTION 15) * For detailed product information, please visit our website: http://www.asrock.com...
  • Page 8 6-channel, and 8-channel modes. Please check the table on page 12 for proper connection. ASRock Instant Flash is a BIOS fl ash utility embedded in Flash ROM. This convenient BIOS update tool allows you to update system BIOS ®...
  • Page 9 Real-Time Analysis of Your Data: With the status window, you can easily recognize which data streams you are transferring currently. ASRock XFast RAM fully utilizes the memory space that cannot be used ® under Windows OS 32-bit CPU. ASRock XFast RAM shortens the load- ing time of previously visited websites, making web surfi...
  • Page 10 To improve heat dissipation, remember to spray thermal grease between the CPU and the heatsink when you install the PC system. ® ® 14. ASRock XFast RAM is not supported by Microsoft Windows XP / XP 64-bit. 15. EuP stands for Energy Using Product, was a provision regulated by the European Union to define the power consumption for the completed system.

  • Page 11: Motherboard Layout

    1.3 Motherboard Layout 17.0cm (6.7 in) E35LM1 DDR3 CMOS CHA_FAN1 Battery USB 2.0 T: USB0 B: USB1 CLRCMOS1 Super PANEL 1 CHA_FAN2 PLED PWRBTN HDLED RESET USB 2.0 Top: T: USB4 RJ-45 B: USB5 COM1 HD_AUDIO1 USB6_7 USB8_9 32Mb SPEAKER1 BIOS CIR1 AUDIO...

  • Page 12: I/O Panel

    1.4 I/O Panel PS/2 Keyboard/Mouse Port (Purple/Green) Line In (Light Blue) VGA Port ** 8 Front Speaker (Lime) LAN RJ-45 Port Microphone (Pink) Central / Bass (Orange) USB 2.0 Ports (USB45) Rear Speaker (Black) USB 2.0 Ports (USB01) Optical SPDIF Out Port * There are two LED next to the LAN port.
  • Page 13 To enable Multi-Streaming function, you need to connect a front panel audio cable to the front panel audio header. After restarting your computer, you will fi nd “Mixer” tool on your system. Please select “Mixer ToolBox” , click “Enable playback multi-streaming”, and click “ok”.

  • Page 14: Installation

    Chapter 2: Installation This is a Mini-ITX form factor (6.7" x 6.7", 17.0 x 17.0 cm) motherboard. Before you install the motherboard, study the confi guration of your chassis to ensure that the motherboard fi ts into it. Make sure to unplug the power cord before installing or removing the motherboard.

  • Page 15: Installation Of Memory Modules (Dimm)

    2.3 Installation of Memory Modules (DIMM) E35LM1 motherboard provides two 240-pin DDR3 (Double Data Rate 3) DIMM slots. It is not allowed to install a DDR or DDR2 memory module into DDR3 slot; otherwise, this motherboard and DIMM may be damaged. Installing a DIMM Please make sure to disconnect power supply before adding or removing DIMMs or the system components.

  • Page 16: Expansion Slot (Pci Express Slot)

    2.4 Expansion Slot (PCI Express Slot) There is 1 PCI Express slot on this motherboard. PCIE slot: PCIE1 (PCIE x16 slot; Blue) is used for PCI Express x4 lane width graphics cards. Installing an expansion card Step 1. Before installing the expansion card, please make sure that the power supply is switched off or the power cord is unplugged.

  • Page 17: Asrock Smart Remote Installation Guide

    2.5 ASRock Smart Remote Installation Guide ASRock Smart Remote is only used for ASRock motherboard with CIR header. Please refer to below procedures for the quick installation and usage of ASRock Smart Remote. Step1. Find the CIR header located next to the USB 2.0 header on ASRock...
  • Page 18 The Multi-Angle CIR Receiver does not support Hot-Plug function. Please install it before you boot the system. * ASRock Smart Remote is only supported by some of ASRock motherboards. Please refer to ASRock website for the motherboard support list: http://www.asrock.com...

  • Page 19: Jumpers Setup

    2.6 Jumpers Setup The illustration shows how jumpers are setup. When the jumper cap is placed on pins, the jumper is “Short”. If no jumper cap is placed on pins, the jumper is “Open”. The illustration shows a 3-pin jumper whose pin1 and pin2 are “Short”...

  • Page 20: Onboard Headers And Connectors

    2.7 Onboard Headers and Connectors Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage of the motherboard! Serial ATA3 Connectors These four Serial ATA3 (SATA3) connectors support SATA data (SATA3_1: see p.11, No.
  • Page 21 1. High Defi nition Audio supports Jack Sensing, but the panel wire on the chassis must support HDA to function correctly. Please follow the instruction in our manual and chassis manual to install your system. 2. If you use AC’97 audio panel, please install it to the front panel audio header as below: A.
  • Page 22 The front panel design may differ by chassis. A front panel module mainly consists of power switch, reset switch, power LED, hard drive activity LED, speaker and etc. When connecting your chassis front panel module to this header, make sure the wire assignments and the pin assign-ments are matched correctly.

  • Page 23: Serial Ata3 (Sata3) Hard Disks Installation

    2.8 Serial ATA3 (SATA3) Hard Disks Installation This motherboard adopts AMD A50M chipset that supports Serial ATA3 (SATA3) hard disks. You may install SATA3 hard disks on this motherboard for internal stor- age devices. This section will guide you to install the SATA3 hard disks. STEP 1: Install the SATA3 hard disks into the drive bays of your chassis.

  • Page 24: Sata / Sataii / Sata3 Hdd Hot Plug Feature And Operation Guide

    SATA / SATAII / SATA3 Hot Plug support information of our motherboard is indicated in the product spec on our website: www.asrock.com 2. Make sure your SATA / SATAII / SATA3 HDD can support Hot Plug function from your dealer or HDD user manual.
  • Page 25 How to Hot Plug a SATA / SATAII / SATA3 HDD: Points of attention, before you process the Hot Plug: Please do follow below instruction sequence to process the Hot Plug, improper procedure will cause the SATA / SATAII / SATA3 HDD damage and data loss. Step 1 Step 2 Please connect SATA power cable 1x4-pin end...

  • Page 26: Driver Installation Guide

    2.11 Driver Installation Guide To install the drivers to your system, please insert the support CD to your optical drive fi rst. Then, the drivers compatible to your system can be auto-detected and listed on the support CD driver page. Please follow the order from up to bottom side to install those required drivers.
  • Page 27 Using SATA / SATAII / STA3 HDDs without NCQ function STEP 1: Set up UEFI. A. Enter UEFI SETUP UTILITY Advanced screen Storage Confi guration. B. Set the option “SATA Mode” to [IDE]. ® STEP 2: Install Windows 7 / 7 64-bit / Vista / Vista 64-bit OS on your system.

  • Page 28: Uefi Setup Utility

    Chapter 3: UEFI SETUP UTILITY Introduction This section explains how to use the UEFI SETUP UTILITY to confi gure your system. The UEFI chip on the motherboard stores the UEFI SETUP UTILITY. You may run the UEFI SETUP UTILITY when you start up the computer. Please press <F2>...

  • Page 29: Navigation Keys

    3.1.2 Navigation Keys Please check the following table for the function description of each navigation key. Navigation Key(s) Function Description Moves cursor left or right to select Screens Moves cursor up or down to select items + / - To change option for the selected items <Tab>...

  • Page 30: Oc Tweaker Screen

    3.3 OC Tweaker Screen In the OC Tweaker screen, you can set up overclocking features. DRAM Timing Confi guration DRAM Frequency If [Auto] is selected, the motherboard will detect the memory module(s) inserted and assigns appropriate frequency automatically. DRAM Timing Control Power Saving Mode Use this to enable or disable Power Saving Mode.
  • Page 31 CAS# Latency (tCL) Use this item to change CAS# Latency (tCL) Auto/Manual setting. The default is [Auto]. RAS# to CAS# Delay (tRCD) Use this item to change RAS# to CAS# Delay (tRCD) Auto/Manual setting. The default is [Auto]. Row Precharge Time (tRP) Use this item to change Row Precharge Time (tRP) Auto/Manual setting.
  • Page 32 Voltage Confi guration DRAM Voltage Use this to select DRAM Voltage. The default value is [Auto]. FCH Voltage Use this to select FCH Voltage. The default value is [Auto]. +1.8V Voltage Use this to select +1.8V Voltage. The default value is [Auto]. +1V Voltage Use this to select +1V Voltage.

  • Page 33: Advanced Screen

    3.4 Advanced Screen In this section, you may set the confi gurations for the following items: CPU Confi gu- ration, North Bridge Confi guration, South Bridge Confi guration, Storage Confi gura- tion, Super IO Confi guration, ACPI Confi guration and USB Confi guration. Setting wrong values in this section may cause the system to malfunction.

  • Page 34: Cpu Confi Guration

    3.4.1 CPU Configuration Cool ‘n’ Quiet Use this item to enable or disable AMD’s Cool ‘n’ Quiet technology. The default value is [Enabled]. Confi guration options: [Auto], [Enabled] and ® [Disabled]. If you install Windows 7 / Vista and want to enable this function, please set this item to [Enabled].

  • Page 35: North Bridge Confi Guration

    3.4.2 North Bridge Configuration Primary Graphics Adapter This item will switch the PCI Bus scanning order while searching for video card. It allows you to select the type of Primary VGA in case of multiple video controllers. The default value of this feature is [PCI Express]. Cofi...

  • Page 36: South Bridge Confi Guration

    3.4.3 South Bridge Configuration Onboard HD Audio Select [Auto], [Enabled] or [Disabled] for the onboard HD Audio feature. If you select [Auto], the onboard HD Audio will be disabled when PCI Sound Card is plugged. Front Panel Select [Auto] or [Disabled] for the onboard HD Audio Front Panel. Onboard LAN This allows you to enable or disable the “Onboard LAN”...

  • Page 37: Storage Confi Guration

    3.4.4 Storage Configuration SATA Controller Use this to enable or disable SATA controller. The default value is [Enabled]. SATA Mode Use this to select SATA mode. Confi guration options: [IDE Mode] and [AHCI Mode]. The default value is [AHCI Mode]. AHCI (Advanced Host Controller Interface) supports NCQ and other new features that will improve SATA disk perfor- mance but IDE mode does not have these advantages.

  • Page 38: Super Io Confi Guration

    3.4.5 Super IO Configuration Serial Port Use this item to enable or disable the onboard serial port. Serial Port Address Use this item to set the address for the onboard serial port. Confi guration options: [3F8h / IRQ4] and [3E8h / IRQ4]. CIR Controller Use this item to enable or disable CIR controller.

  • Page 39: Acpi Confi Guration

    3.4.6 ACPI Configuration Suspend to RAM Use this item to select whether to auto-detect or disable the Suspend-to- RAM feature. Select [Auto] will enable this feature if the OS supports it. Check Ready Bit Use this item to enable or disable the feature Check Ready Bit. ACPI HPET Table Use this item to enable or disable ACPI HPET Table.
  • Page 40 OMG (Online Management Guard) Administrators are able to establish an internet curfew or restrict internet access at specifi ed times via OMG. You may choose from [Everyday], [Day of the week] or [Weekdays and weekends], then schedule the starting and ending hours of internet access granted to other users.

  • Page 41: Usb Confi Guration

    3.4.7 USB Configuration USB 2.0 Controller Use this item to enable or disable the use of USB 2.0 controller. Legacy USB Support Use this option to select legacy support for USB devices. There are four confi guration options: [Enabled], [Auto], [Disabled] and [UEFI Setup Only]. The default value is [Enabled].

  • Page 42: Hardware Health Event Monitoring Screen

    3.5 Hardware Health Event Monitoring Screen In this section, it allows you to monitor the status of the hardware on your system, including the parameters of the CPU temperature, motherboard temperature, CPU fan speed, chassis fan speed, and the critical voltage. CPU Fan Setting This allows you to set the CPU fan speed.

  • Page 43: Boot Screen

    3.6 Boot Screen In this section, it will display the available devices on your system for you to confi g- ure the boot settings and the boot priority. Setup Prompt Timeout This shows the number of seconds to wait for setup activation key. 65535(0XFFFF) means indefi...

  • Page 44: Security Screen

    3.7 Security Screen In this section, you may set or change the supervisor/user password for the system. For the user password, you may also clear it.

  • Page 45: Exit Screen

    3.6 Exit Screen Save Changes and Exit When you select this option, the following message “Save confi guration changes and exit setup?” will pop-out. Select [Yes] to save the changes and exit the UEFI SETUP UTILITY. Discard Changes and Exit When you select this option, the following message “Discard changes and exit setup?”...

  • Page 46: Software Support

    Click on a specifi c item then follow the installation wizard to install it. 4.2.4 Contact Information If you need to contact ASRock or want to know more about ASRock, welcome to visit ASRock’s website at http://www.asrock.com; or you may contact your dealer for further information.
  • Page 47 Installing OS on a HDD Larger Than 2TB ® This motherboard is adopting UEFI BIOS that allows Windows OS to be installed on a large size HDD (>2TB). Please follow below procedure to install the operating system. ® 1. Please make sure to use Windows Vista 64-bit (with SP1 or above) or ®...

Table of Contents