Table of Contents
Advertisement
INSTALLATION
Dimensions
a=825 mm
b=595 mm
c=560 mm
Weight=30 kg
Remove the transport packaging (fig.1) and remove the dryer rack
from the top packaging (fig.2). Remove the tape on the front (fig.3
and fig.4), the wall mounting kit attached to the drum with tape on
the inside and the panel film, before starting the dryer.
fig.1
Packing accessories
Check list of the accessories and materials provided with the machine:
Name
Ower's manual
Quantity
To ensure the dryer operating normally, attention must be paid to the
following in placement:
1. The rear of the dryer must not have any restriction to the intake of
fresh air.
2.Check whether there is any damage to the dryer during transportation.
Any damaged dryer musy not be electrified. In case of any damage,
contact your dryer supplier;
3.The dryer must be kept away from flammable substances;
4.The surrounding environment must be dry and ventilated;
5. In order to make the dryer perform better, the ambient temperature shall
neither be lower than 10
fig.2
Wall mounting kit Panel film
1
nor higher than 35
fig.3
1
8
fig.4
Screw
1
6
.
Advertisement
Table of Contents
