System Fan - HP ProLiant SL2x170z G6 Server Maintenance And Service Manual

Figure 42 Removing the power supply

System fan

The server has four system fans located on the chassis' center wall.
The figure below identifies the system fans by their device number and shows their corresponding
cable connections.
Figure 43 System fan connection
Device number
System fan 1
System fan 2
System fan 3
System fan 4
A new system fan can be installed to allow the server to operate properly in case a default system fan
becomes defective.
Connector
J11 on the power supply backplane
J10 on the power supply backplane
J8 on the power supply backplane
J6 on the power supply backplane, optional
Removal and replacement procedures 53