Power Supply Unit (Psu) - HP ProLiant SL2x170z G6 Server Maintenance And Service Manual

Figure 37 Installing the tray assembly
NOTE: After the system board is replaced, reset specific BIOS settings including the system
serial number using the Setup Utilities procedures on page 63.

Power supply unit (PSU)

Located on the rear panel of the server power supply is a standard auto ranging 750 watt PSU with
PFC (power factor correction) function.
Figure 39 Power supply unit
WARNING: Take note of the following reminders to reduce the risk of personal injury from electric
shock hazards and/or damage to the equipment.
•
Installation of power supply units should be referred to individuals who are qualified to service server
systems and are trained to deal with equipment capable of generating hazardous energy levels.
•
DO NOT open the power supply unit. There are no serviceable parts inside it.
Removal and replacement procedures 51