Table of Contents
Advertisement
Chapter 5
Attaching the Fan Module to the Power Supply
Attach an operating fan module to an operating power supply.
1. Hold the fan module and insert the tabs on bottom of the fan module into
the slots on the bottom of the power supply.
2. Lift the fan module until the top tabs snap into the top slots of the power
supply.
Installing the Power Supply
1. Insert the power supply until it is fully seated in the chassis.
2. Tighten the two thumbscrews to secure the power supply assembly to the
chassis.
3. Plug the power cord into the power supply and into the AC source.
4. Secure the power cord in the cable retention clamp.
5. Verify the Power and Fan status LEDs on the power supply both display
Green (normal operating mode).
42
Removing and Installing HP Rack Storage/12 Components
Advertisement
Table of Contents
