HP Rack Storage/12 Installation Manual page 42

Chapter 5
Exposed
Light Pipes
Figure 5-3. Components of the Hard Drive
CAUTION
Do not damage the light pipes when handling or installing
the hard drive. The light pipes are exposed on the rear of the
hard drive.
2. Slide the drive slowly into the drive slot until it stops (see Figure 5-4).
3. Press the ejector handle until you feel the locking latch click into place.
The hard drive power indicator displays Green when the hard drive is
correctly installed.
4. Install filler panels in unused drive slots.
36
Removing and Installing HP Rack Storage/12 Components
Locking Tab
Ejector
Handle
Locking
Latch