Operating And Managing The Hp Rack Storage/12; Power On - HP Rack Storage/12 Installation Manual

Chapter 2
AC Power Connector
Connects the power supply to the AC source.
Power Status LED
The Power status LED displays the current operating condition of the power
supply.
Green: Normal operation.
Off: No power or power supply failure.
Fan Status LED
The fan status LED displays the current operating condition of the fan module.
Green: Normal operation.
Off: No power or fan module failure.

Operating and Managing the HP Rack Storage/12

Power On

The power switch is located on the top center of the rear panel.
NOTE
5 VDC standby power is supplied to the HP Rack Storage/12
even when the power switch is set OFF. To remove standby
power, disconnect both power supplies from their AC sources.
1. Lift the hinged cover and set the power switch on.
16
Controls, Ports, and Indicators