StarTech.com SAT2520U2ER User Manual page 18

8. GUI ONLY Mode
DIP SW-1: ON, SW-2: ON, SW-4: ON
This mode offers configuration through the GUI(Graphic Utility Inter-
face). Using this mode, you can allow different RAID combinations.
This mode It is reccomended for professional & advanced users.
For more detailed information regarding the use of these Storage Policies,
refer to the Silicon Image SteelVine Manager user's manual.
Connection notes:
After you set or change the RAID Mode, press the "Change Mode But-
ton" once. It is also necessary to press the "Change Mode Button" once,
even if you use the default RAID Mode.
Once the enclosure has been connected to the host computer, it will be
visible from the Device Manager (Windows). The device will not be visible
from 'my computer' until after the drive has been formatted and parti-
tioned.
USB: To ensure a sufficient amount of power is provided for the enclo-
sure, both the USB and USB to DC5V connectors on the included 1 X
USB + USB to DC5V Cable must be connected to available USB ports
on the rear panel of the computer.
eSATA: In order for SAT2520U2ER to function without using the external
power adapter, a USB connection to the host computer is required. As
such, please connect the (included) USB and USB to DC5 cable to two
available USB ports on the rear panel of the computer.
Instruction Manual
14