Unit - Conair CSC User Manual

Before you start daily operation of the combination puller/cut-
ter, you need to perform preventative maintenance. Necessary
maintenance is described in the Maintenance section of this
Users Guide, Section 5.
WARNING:
puller/cutter is OFF when doing any mainte-
nance on the puller/cutter. Follow all safety
rules when performing any maintenance on this
equipment.
Daily maintenance includes:
Inspecting the puller belt
Inspecting the cutter blades
Inspecting the blade mounting hardware
Making sure the cutter bushings are properly secured
Inspecting the closure latch on the knife guard
Checking alignment with extrusion line
Performing any floor lock adjustments as needed
These items and weekly, monthly, and semi-annual mainte-
nance procedures are detailed in the Maintenance section of
this User Guide.
DANGER: Pinch Hazard!
Never remove or disable safety devices to sus-
tain production. Operating without these
devices could lead to hazardous conditions that
can cause severe injury. Take all necessary
precautions when working around moving parts
to prevent body parts and clothing from being
pulled into the machine.
UGE048/1103
Be sure that power to the
CSC Combination Puller/Cutter
B
EFORE
S
TARTING
C
OMBINATION
U
NIT
O
PERATION
4-29