Cutter Control Features - Conair CSC User Manual

C
UTTER
O
PERATOR
C
ONTROL
F
EATURES
Fixed Function
Keys-Contain uni-
versal symbols &
text
4-2
O
PERATION
The Operator Control provides an intuitive user-friendly
method to interface with the Conair Servo Cutter. Information
is viewed and entered at the Operator Control and is commu-
nicated to the servo positional amplifier via the RS-232 serial
communication link.
The Operator Control is a flat membrane panel consisting of
22-keys and a large 2 line x 20 back lit LCD screen.
Soft Keys-allows
the operator to
select different
functions.
Numeric Keys-
Permits data entry
for the operator
Soft Keys
Soft keys - these are the three keys directly under the display.
All three have a triangle on them. Occasionally, pages will
appear that allow the operator to use one of the soft keys. On
those occasions, text would typically appear directly above
the key and the key will have a function. Think of the text as
the soft key function indicator or title. These keys will be
referred to in this manual from left to right as soft keys 1, 2
and 3 respectively.
Numeric Keys
These are the black keys containing numbers 0 to 9. Numbers
permit data entry of parameters. See Raise and Lower for
value trim.
Fixed Function Keys (at Bottom)
Underneath the numeric keys are fixed function keys. They
contain universal symbols and text. The fixed function keys
are Raise, Lower, Next, Prev (previous), Enter, Delete, Exit,
Menu and Mute. These functions are described in the
"Function keys - Fixed Functions" section of this manual.
LCD Screen
The screen shows various pages depending on operator
actions. In addition, it is used to indicate warnings.
Mostly, it is used for viewing status and for setting parame-
ters.
CSC Combination Puller/Cutter
CONAIR SERVO CUTTER
Version 1.0
UGE048/1103