Identifying The Cause Of A Problem - Conair CSC User Manual

I
DENTIFYING THE
C
AUSE OF A
P
ROBLEM
6-4
T
ROUBLESHOOTING
The Troubleshooting section covers problems directly related
to the operation and maintenance of the Combination
Puller/Cutter. This section does not provide solutions to prob-
lems that originate with other equipment. Additional trou-
bleshooting help can be found in manuals supplied with the
other equipment.
The main problems you will see with the Combination
Puller/Cutters are:
Puller operation problems, which focus on problems
that are clearly related to the pullers mechanical compo-
nents and electrical control system.
Cutter operation problems, which focus on problems
that are clearly related to the operation of the cutter's
mechanical components and electrical control system.
Product quality concerns. Extrudate quality problems
may be related to Combination Puller/Cutter operation.
Of course, other sections of the extrusion line also influ-
ence the quality of the extruded product. This section
does not provide solutions to problems originating with
other equipment on the extrusion line.
Additional troubleshooting help can be found in the documen-
tation manuals included with this User Guide.
CSC Combination Puller/Cutter UGE048/1103