Conair CSC User Manual page 33

Slide the upstream bushing into position,
4
tioning it up to but not touching the blade. Use the feeler
gauge.
5 Tighten the set screw
bushing to hold the bushing in position.
6
Rotate the cutter head by hand
bushings did not move, and the the blade still passes
through the gap between the bushings.
UGE048/1103
against the flat side of the
to make sure the
CSC Combination Puller/Cutter
M
posi-
OUNTING THE
C
UTTER
B
USHINGS
CONTINUED
I
NSTALLATION
3-9