Troubleshooting; General Information; Service - Kenwood TH-K2AT Instruction Manual

TROUBLESHOOTING

G I
ENERAL NFORMATION
Your transceiver has been factory aligned and tested to
specification before shipment. Under normal
circumstances, the transceiver will operate in
accordance with these operating instructions. All
adjustable trimmers, coils and resistors in the
transceiver were preset at the factory. They should only
be readjusted by a qualified technician who is familiar
with this transceiver and has the necessary test
equipment. Attempting service or alignment without
factory authorization can void the transceiver warranty.
When operated properly, the transceiver will provide
years of service and enjoyment without requiring further
realignment. The information in this section gives some
general service procedures requiring little or no test
equipment.

Service

If it is ever necessary to return the equipment to your
dealer or service center for repair, pack the transceiver
in its original box and packing material. Include a full
description of the problems experienced. Include your
telephone number, fax number, and email address (if
available) along with your name and address in case the
service technician needs to contact you for further
information while investigating your problem. Do not
return accessory items unless you feel they are directly
related to the service problem.
You may return your transceiver for service to the
authorized KENWOOD dealer from whom you
purchased it or to any authorized KENWOOD service
108