Onnecting To A; Lighter; Ocket - Kenwood TH-K2AT Instruction Manual

C

ONNECTING TO A

To connect the transceiver to the cigarette lighter socket
in your vehicle, use an optional PG-3J Cigarette Lighter
cable.
When the PG-3J is connected to the cigarette lighter
plug, the transceiver automatically starts charging the
PB-43N Ni-MH battery pack. While you operate the
transceiver, it charges the PB-43N Ni-MH battery pack
in the background.
To connect with an external 24 V power source via a DC-DC
converter, only use the optional PG-3J Cigarette Lighter cable.
Using the PG-2W DC cable in this situation may cause a fire.
24V
24V
24V
Note:
Do not use the PG-2W to connect a vehicle battery (12 V)
directly. Extensive voltage could result in damaging the
transceiver.
If the input voltage exceeds approximately 16.5 V, warning beeps
sound and "DC ERR" appears.
8
C L
IGARETTE
DC-DC Converter
12V
Socket
12V
DC-DC Converter
12V
S
IGHTER

OCKET

PG-3J
PG-3J
PG-2W