Weather Alert (Th-K2At K/ K2 Only ); Programming The Weather Radio Frequency - Kenwood TH-K2AT Instruction Manual

W A
EATHER LERT
One of the NOAA Weather Radio channels can be
programmed to the AL memory channel of the TH-K2AT.
The transceiver can be configured to check the NOAA
Weather Alert tone (1050 Hz) and will automatically alert
you by recalling and monitoring the Weather Radio
frequency when the Weather Alert tone is broadcasted.

Programming the Weather Radio Frequency

The transceiver is preprogrammed to 162.550 MHz
(WX1). You can store a different frequency to the AL
channel to use this function. Refer to the NOAA
channel frequency directory for your local Weather
Radio frequency before you use the Weather Alert
function. The latest Weather Radio information can be
obtained from http://www.nws.noaa.gov/nwr/.
1 Press [VFO].
2 Select your local NOAA Weather Radio frequency
using the Tuning control or keypad.
3 Press [F], [MR].
4 Turn the Tuning control to select memory channel
"AL" (Alert).
5 Press [MR].
• A long beep sounds and the new NOAA Weather
Radio frequency is stored to memory channel "AL".
W X 1 W
1 6 2 5 . 5 0 1 6
(TH-K2AT K/ K2
W a e h t r e R
X 2 W X 3
2 4 . 0 0 1 6 2 4 . 7 5 1
ONLY
d a o i F e r u q n e i c s e
W X 4 W X 5
6 2 4 . 2 5 1 6 2 4 . 5 0
)
( M H ) z
W X 6 W X 7
1 6 2 5 . 0 0 1 6 2 5 . 2 5
55
W X 8
1 6 3 2 . 7 5