Naming A Memory Channel - Kenwood TH-K2AT Instruction Manual

Note:
Call Channel data cannot be cleared.
You can also clear the Priority Channel, L0/U0 ~ L2/U2 and
Weather Alert data.
While the trasceiver is in Channel Display Mode or Lock function
is activated, you cannot clear the channel data.
To clear all memory channels contents at once, perform Full
Reset {page 111}.
N M
AMING A EMORY
You can name memory channels using up to 6
alphanumeric characters. When you recall a named
memory channel, its name appears on the display in
place of the stored frequency. Names can be call signs,
repeater names, cities, names of people, etc. In order
to use the Memory Name function, the memory channel
capacity must be set to 50 channels. To change the
memory channel capacity from 100 to 50, access Menu
No. 13 (M.CH) {page 41}.
1 Press [MR] to recall your desired memory channel.
2 Press [MENU] to enter Menu Mode.
3 Turn the Tuning control to select Menu No. 14
(M.NAME).
4 Press [MENU].
• A blinking cursor appears.
5 Turn the Tuning control to select a desired
alphanumeric character.
48
C
HANNEL