Troubleshooting Guide - Kenwood TK-3401D Instruction Manual

Problem
Cannot turn the
transceiver power ON.
Battery deterioration
occurs when a battery
pack is charged
repeatedly.
Cannot talk to or hear
other members in your
group.
Other voices (besides
group members') are
present on the channel.
Note:
◆ If the problem persists, contact a KENWOOD authorized service
center for repairs. You may return your transceiver for service to
the authorized KENWOOD dealer from whom you purchased it or
any authorized KENWOOD service center.

TROUBLESHOOTING GUIDE

•
•
•
•
•
•
Solution
The battery pack is discharged.
Recharge the battery pack or
replace the batteries.
The battery pack may not be
installed correctly. Remove the
battery pack and install again.
The battery pack life is finished.
Replace the battery pack with a
new one.
Make sure you are using the
same frequency and Common
ID (Digital)/ QT/DQT (Analog)
settings as the other members in
your group.
Other group members may be
too far away. Make sure you
are within range of the other
transceivers.
Change the Common ID (Digital)/
QT/DQT(Analog) settings. Make
sure all group members change
the settings on their transceivers
to match the new Common ID/
QT/DQT setting.
27