Adjusting The Dtmf Tone Transmission Speed; Adjusting The Pause Duration - Kenwood TH-K2AT Instruction Manual

Adjusting the DTMF Tone Transmission Speed

This transceiver allows you to configure the DTMF
number transmission speed between Fast (default) and
Slow. If a repeater cannot respond to the fast speed,
adjust this parameter.
1 Press [MENU] to enter Menu Mode.
2 Turn the Tuning control to select Menu No. 33
(SPD).
3 Press [MENU].
4 Turn the Tuning control to select "FA" (Fast) or "SL"
(Slow).
• The tone duration of FAST is 50 ms and SLOW is
100 ms. "FA" (Fast) is the default setting.
5 Press [MENU] to store the setting or [PTT] to cancel.

Adjusting the Pause Duration

You can change the pause duration (a space digit)
stored in memory channels. The default setting is
500 miliseconds.
1 Press [MENU] to enter Menu Mode.
2 Turn the Tuning control to select Menu No. 35 (PA).
3 Press [MENU].
4 Turn the Tuning control to select 100, 250,
500 (default), 750, 1000, 1500, 2000 ms.
5 Press [MENU] to store the setting. Otherwise, press
[PTT] to cancel.
80