1080 Digitizer Cable - Lenovo ThinkPad Helix 20CG Hardware Maintenance Manual

Removal steps of the LCD cable
Note: Do not close the connector flips before connecting the cable. When connecting the cable, ensure
that the connectors are attached firmly.

1080 Digitizer cable

Before you replace the digitizer cable, do the following:
1. Disable the built-in battery. See "Disabling the built-in battery" on page 46.
2. Remove the SIM card, SD card, and smart card. See "Removing the SIM card, SD card, and smart
card" on page 46.
3. Remove the back cover assembly. See "1010 Back cover assembly, smart-card reader, and
smart-card-reader cable" on page 48.
4. Disconnect the cable of the built-in battery.
4
3
1
.
Chapter 7 Removing or replacing a FRU
59