Removal step of the smart card
1010 Back cover assembly, smart-card reader, and smart-card-reader
cable
Before you replace the back cover assembly, smart-card reader, or smart-card-reader cable, do the following:
1. Disable the built-in battery. See "Disabling the built-in battery" on page 46.
2. Remove the SIM card, SD card, and smart card. See "Removing the SIM card, SD card, and smart
card" on page 46.
Removal steps of the back cover assembly
Note: The tablet you are servicing might look slightly different from the following illustrations.
48
ThinkPad Helix Hardware Maintenance Manual