1070 Speaker Assembly Near The Built-In Battery; 1080 Trackpad, Fingerprint Reader And P-Sensor Cable - Lenovo ThinkPad X1 Nano Gen 1 Hardware Maintenance Manual

Hide thumbs Also See for ThinkPad X1 Nano Gen 1:
Table of Contents

Advertisement

Step
Screw (quantity)
1
M2 × L4.5 mm, flat-head, nylon-coated (6)
Note: After the built-in battery is removed or re-installed, Date/Time, power-on password and system
management passwords are initialized. Press F1 to enter the ThinkPad Setup program to change Date/Time.

1070 Speaker assembly near the built-in battery

For access, remove these FRUs:
• "1010 Base cover assembly" on page 57
• "1060 Built-in battery" on page 62
Removal steps of the speaker assembly near the built-in battery
Step
Screw (quantity)
2
M2 × L2.3 mm, big-hat, nylon-coated (4)

1080 Trackpad, fingerprint reader and P-sensor cable

For access, remove these FRUs in order:
• "1010 Base cover assembly" on page 57
• "1060 Built-in battery" on page 62
Color
Torque
Silver
0.181 Nm
(1.85 kgf-cm)
Color
Torque
Gold
0.181 Nm
(1.85 kgf-cm)
.
Chapter 8
Removing or replacing a FRU
63

Advertisement

Table of Contents
loading

Table of Contents