Removal steps of the POGO cable
Step
Screw (quantity)
4
M1.6 × L3.5 mm, flat-head, nylon-coated (2)
Note: When connecting the cable, ensure that the connector is attached firmly.
1070 LCD FPC
For access, remove the following FRU:
• "1010 Back cover assembly " on page 51
Removal steps of the LCD FPC
Note: When connecting the cable, ensure that the connector is attached firmly.
1080 NFC board, NFC-board cable, and NFC antenna assembly
For access, remove these FRUr:
• "1010 Back cover assembly " on page 51
Color
Torque
Black
0.098 Nm
(1 kgf-cm)
.
Chapter 7
Removing or replacing a FRU
57