1050 M.2 Solid-State Drive And Solid-State-Drive Mylar - Lenovo ThinkPad Helix 20CG Hardware Maintenance Manual

1050 M.2 solid-state drive and solid-state-drive mylar

Before you replace the M.2 solid-state drive or solid-state-drive mylar, do the following:
1. Disable the built-in battery. See "Disabling the built-in battery" on page 46.
2. Remove the SIM card, SD card, and smart card. See "Removing the SIM card, SD card, and smart
card" on page 46.
3. Remove the back cover assembly. See "1010 Back cover assembly, smart-card reader, and
smart-card-reader cable" on page 48.
4. Disconnect the cable of the built-in battery.
Removal steps of the M.2 solid-state drive and solid-state-drive mylar
56
ThinkPad Helix Hardware Maintenance Manual
1