Table of Contents
Advertisement
fcp1mst.book Page 2 Wednesday, June 2, 1999 4:02 PM
Figure 4-1. LAN Adapter Cable (100BASE-TX/10BASE-T)
Diagnostic Self Test
IBM provides both a DOS-based and Windows based self-test
diagnostics program. The programs test several EtherJet Card-
Bus Adapter functions. It also reports test results, the serial num-
ber of the unit, and the node address.
Program
IBMCTEST.EXE
EJETDIAG.EXE
Note: IBMCTEST can be run only from the MS-DOS command
line. It cannot be run from a DOS box within Windows.
Executing the MS-DOS/Windows 3.x
Diagnostic Program (IBMCTEST.EXE)
Use the following steps to execute the self-test.
1. Install the EtherJet CardBus Adapter according to the instruc-
tions contained in Chapter 1.
2. Power down and restart the computer from MS-DOS. Do not
load a network driver.
4-2
10/100 EtherJet CardBus Adapter
For Use With
Diskette Found On
DOS, Win 3.X
IBM CD-ROM
Win 95, 98, NT IBM CD-ROM
Advertisement
Table of Contents
Troubleshooting
