Table of Contents
Advertisement
fcp1mst.book Page 3 Wednesday, June 2, 1999 4:02 PM
Note: Do not run IBMCTEST with a network driver loaded.
Loading a network driver before running IBMCTEST
may cause unpredictable results when exiting the test
utility.
3. Type IBMCTEST at the MS-DOS prompt and press Enter.
Main Screen
The program consists of several function buttons and a view
pane. Pressing or invoking a function will bring up the corre-
sponding panel in the view pane. This view remains until another
is selected. To exit IBMCTEST type x or push the Exit button.
When a function is active, the button appears to remain down or
pushed. Once the button pops up, the function is completed and
the screen is a passive results display.
Nine functions can be invoked by pushing the associated button
on the main panel, using the highlighted letter indicated on the
button, or the left mouse button. Online help is provided.
Note: Write down the EtherJet CardBus Adapter model and
serial numbers for reference.
Executing the Windows 95, 98, and NT
Diagnostic Program (EJETDIAG.EXE)
1. Make sure the EtherJet CardBus Adapter is installed and has
been configured to work in your version of Windows.
2. Insert the IBM CD-ROM.
3. Select File, Run, path\EJETDIAG.EXE, where path\ is the
drive containing the IBM CD-ROM.
4. Navigate through the diagnostic program by clicking on the
appropriate tab. When finished, click OK to exit.
Diagnostics and Troubleshooting
4-3
Advertisement
Table of Contents
Troubleshooting
