Installing Under Nt 4.0; Installation Under Nt 4.0 Using Card And Socket Services - IBM 10/100 EtherJet CardBus Adapter Installation And Planning Manual

fcp1mst.book Page 3 Wednesday, June 2, 1999 4:02 PM

Installing under NT 4.0

Insert the EtherJet CardBus Adapter into the CardBus PC Card
slot.
• Adapter detected: If the EtherJet CardBus Adapter is
detected, go to the section "Installation under NT 4.0 Using
Card and Socket Services."
• Adapter not detected: If the EtherJet CardBus Adapter is
not detected, go to "Installation under NT 4.0 without Card
and Socket Services."
Installation under NT 4.0 Using Card and
Socket Services
1. Once the Card Services software has detected the adapter,
follow the on screen installation instructions for your Card and
Socket Services software. Use of default resource settings is
recommended.
2. If the Card Services software includes a driver for the
EtherJet CardBus Adapter, install that driver. To verify that
you have the latest Windows 95, 98, and NT Network Drivers,
visit the IBM web site. Otherwise, follow the guidelines below:
• SystemSoft CardWizard Card Services software will
display a CardWizard icon on the task bar when you
insert the adapter. Use the driver IBMC.SYS, located in
the root of the IBM CD-ROM.
• Phoenix CardExecutive and Softex PC Card
Controller use the driver IBMCNT.SYS, located in the
\IBMCNT directory on the IBM CD-ROM. When the Card
Services software prompts for the driver diskette, enter
the path\IBMCNT, were path\ is the drive containing the
IBM CD-ROM.
• Award CardWare instructions are in the README.TXT
file on the IBM CD-ROM.
Running H/F 2 3-3