Safety Notices; Telecommunications Safety Requirements In The United Kingdom; Statement Of Compliance With The United Kingdom Telecommunications Act 1984; Electronic Emission Notices - IBM 10/100 EtherJet CardBus Adapter Installation And Planning Manual

Table of Contents

fcp1mst.book Page 2 Wednesday, June 2, 1999 4:02 PM

Some jurisdictions do not allow the exclusion of implied warran-

ties, so the above exclusion may not apply to you.

Your failure to comply with the terms above terminates this autho-

rization. Upon termination, you must destroy your machine-read-

able documentation.

Safety Notices

Telecommunications Safety Requirements

in the United Kingdom

This IBM product is made to high safety standards. It complies

inherently with telecommunications safety standard BS 6301. It

is not designed to provide protection from excessive voltages

appearing externally at its interfaces. Therefore, when this prod-

uct is connected to a public telecommunications network via any

other equipment, and you connect to this product items not sup-

plied by IBM United Kingdom Ltd., you must comply with manda-

tory telecommunications safety requirements.

Statement of Compliance with the United

Kingdom Telecommunications Act 1984

This apparatus is approved under approval number NS/G/1234/J/

100003 for indirect connections to the public telecommunications

systems in the United Kingdom.

Federal Communications Commission

(FCC) Statement

Note: This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide rea-

sonable protection against harmful interference in a resi-

dential installation. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and

C-2

10/100 EtherJet CardBus Adapter

Table of Contents