Windows 95 And Windows 98 Troubleshooting; Manual Installation Under Windows 95 Version 950B (Osr2) And Later - IBM 10/100 EtherJet CardBus Adapter Installation And Planning Manual

fcp1mst.book Page 3 Wednesday, June 2, 1999 4:02 PM
11. In the Network window, click OK.
The IBM dialog box displays various settings. An asterisk (*)
in any field indicates that the current setting is incorrect. Use
the Up or Down arrow to adjust the setting until the asterisk
disappears.
12. Click OK. The Copying Files window opens.
13. Insert your original Windows 95 or Windows 98 CD-ROM or
diskette (identify the drive that holds the CD-ROM or diskette)
and click OK. The System Settings window opens.
Note: If Windows 95 was preinstalled, the necessary files are
located in the following directory:
c:\windows\options\cabs
14. Click Yes when prompted to restart the computer.
Notes
1. If you hear a Windows 95 "error" beep on reboot, ignore
it.
2. For supplementary information on Windows 95 versions
950/950a, see the Windows Help file HELPDOCS.HLP
on the IBM CD-ROM.
Windows 95 and Windows 98
Troubleshooting
The EtherJet CardBus Adapter is detected by Windows 95 Ver-
sion 950b (OSR2), but does not initialize or shows errors in
Device Manager.
The EtherJet CardBus Adapter may need to be installed manually
under Windows 95 version 950b and later even if it was detected
(as indicated by the message New Hardware Found ). Manual
installation instructions follow.
Manual Installation under Windows 95
Version 950b (OSR2) and Later
1. Click the Start button in the lower left corner of the screen.
2. Choose the menu item: Settings.
Windows 95 and Windows 98 Installation 2-3