Table of Contents
Advertisement
fcr0mst.book Page 1 Monday, July 13, 1998 9:36 AM
Chapter 2. Windows 95 and
Windows 98 Installation
Plug and Play Installation
Plug and play installation of the EtherJet CardBus Adapter with
56K Modem is supported under Windows 95 OSR2 (version
950b) and Windows 98. Installation with these versions of Win-
dows is described in this chapter.
Note: If you are using an earlier version of Windows 95 (version
950 or 950a), see the README.TXT file on the Windows
95, 98, and NT Network Drivers Diskette for installation
information.
Drivers Available
The following drivers for Windows 95 and 98 are supplied with
the EtherJet CardBus Adapter with 56K Modem:
• an NDIS3 driver (IBMC.SYS)
• an NDIS4 driver (IBMCN4.SYS)
• 32-bit ODI driver (IBMC.LAN) with promiscuous support
The NDIS3 driver IBMC.SYS is installed by default using the pro-
cedures in this chapter. For NDIS4 instructions, see the
README.TXT file on the Windows 95, 98, and NT Network Driv-
ers Diskette.
Installing under Windows 95 and 98
Insert the EtherJet CardBus Adapter with
56K Modem
1. With Windows running, insert the EtherJet CardBus Adapter
with 56K Modem into the CardBus PC Card slot and connect
cables as shown in Chapter 1, "Hardware Installation".
© IBM Corporation, 1998
2-1
Advertisement
Table of Contents
Troubleshooting
