Postscript Envelope Size Support - Lexmark MS911 Technical Reference

PostScript (PS) emulation
= Supported
X = Not supported
Operator
executivetray
foliotray
ledgertray
legaltray
lettertray
oficiotray
sra3tray
statementtray

PostScript envelope size support

The literal names in "Envelope sizes supported" on page 13
change the image size but not the active paper source. Therefore, when these operators are used, part of the image may be
clipped.
When these literal names are used as operators, it is equivalent to executing the following PostScript emulation sequence.
The following example uses a 3.875 x 7.5‑inch envelope.
<</Policies <</PageSize 7>> /PageSize [279 540]>> >>setpagedevice
= Supported
X = Not supported
Envelope sizes
Size name Literal name
7 3/4 3.875x7.5envelope
Commercial 9 3.875x8.875envelope
Commercial 10 4.125x9.5envelope
International B5 176x250envelope
International C5 162x229envelope
International DL 110x220envelope
Other envelope otherenvelope
Tray selected (corresponding
image size is set)
Tray with executive-size paper
Tray with folio-size paper
Tray with ledger‑size paper
Tray with legal-size paper
Tray with letter-size paper
Tray with oficio‑size paper
Tray with sra3‑size paper
Tray with statement-size paper
Size (mm)
98.4 x 190.5
98.4 x 225.4
104.8 x 241.3
176 x 250
162 x 229
110 x 220
229.11 x 355.6
MS911
are also supported as operators in userdict. These operators
Size (in.) Size (points)
3.875 x 7.5 279 x 540
3.875 x 8.875 279 x 639
4.125 x 9.5 297 x 684
6.93 x 9.84 499 x 708
6.38 x 9.01 459 x 649
4.33 x 8.66 312 x 624
9.02 x 14.0 649 x 1008
Printer model
MX910, MX911, MX912
Printer model
MS911
13
MX910,
MX911,
MX912