Postscript Envelope Size Support - Lexmark MS310d Technical Reference

PostScript (PS) emulation
= Supported
X = Not supported
Operator
foliotray
ledgertray
legaltray
lettertray
oficiotray
statementtray

PostScript envelope size support

The literal names in "Envelope sizes supported" on page 12
change the image size but not the active paper source. Therefore, when these operators are used, part of the image may be
clipped.
When these literal names are used as operators, it is equivalent to executing the following PS emulation sequence. The following
example uses a 3.875 x 7.5‑inch envelope.
<</Policies <</PageSize 7>> /PageSize [279 540]>> >>setpagedevice
= Supported
X = Not supported
Envelope sizes
Size name Literal name
7 3/4 3.875x7.5envelope
Commercial 9 3.875x8.875envelope
Commercial 10 4.125x9.5envelope
International B5 176x250envelope
International C5 162x229envelope
International DL 110x220envelope
Other envelope otherenvelope
Tray selected
(corresponding image size
is set)
Tray with folio-size paper
Tray with ledger‑size paper
Tray with legal-size paper
Tray with letter-size paper
Tray with oficio‑size paper
Tray with statement-size
paper
Size (mm)
98.4 x 190.5
98.4 x 225.4
104.8 x 241.3
176 x 250
162 x 229
110 x 220
296.93 x 427.48
MS310, MS312, MS315,
MS410, MS415, MS510,
MS610
are also supported as operators in userdict. These operators
Size (in.) Size (points)
3.875 x 7.5 279 x 540
3.875 x 8.875 279 x 639
4.125 x 9.5 297 x 684
6.93 x 9.84 499 x 708
6.38 x 9.01 459 x 649
4.33 x 8.66 312 x 624
11.69 x 16.83 842 x 1212
Printer model
MX310, MX410, MX610, MX611
MX510, MX511
Printer model
MS310, MX310,
MS312, MX410,
MS315, MX510,
MS410, MX511
MS415,
MS510,
MS610
12
MX610,
MX611