Lexmark MS911 Technical Reference page 9

Printer Control Language (PCL) page formatting
Selection
Page size Name
2
parameters
91 C5
Envelope
5 B5
99 , 100
Envelope
600 Other
Envelope
1
Pel dimensions are for 600 dpi.
2
For more information, see the Page Control table in the PCL chapter of the Printer Language and Interfaces Technical Reference.
3
The width of the logical page can be changed from the control panel or your application.
4
Supports two‑sided printing if size length is between 5.83 inches (148 mm) and 18 inches (458 mm); and the width is between
5.5 inches (140 mm) and 12.6 inches (320 mm). Area dimensions for this paper are listed in pel ranges.
5
Paper ID 99 is supported for backward compatibility with other Lexmark printers. It has the same logical paper size as ID 100
(compatible with HP LaserJet 5Si/5SiMx) but is 8 pels wider than the Lexmark 4039.
Note: The explanation of the printable area assumes that the Print Area menu item is set to Normal. For more information, see
"Print Area Menu Item" in the PCL chapter of the Printer Language and Interfaces Technical Reference.
Paper/envelope dimensions
mm inches
229 x 162 9.02 x 6.38
176.0 x 250.0 6.93 x 9.84
229.11 x 355.6 9.02 x 14.0
Dimensions by area (pels)
A B C
3826 5408 3542 5172
4156 5904 3872 5668
5100 8400 4800 8160
1
D E F G H
142 118 0 100
142 118 0 100
150 120 0 100
9
I
100
100
100