Table of Contents
Advertisement
5
Appliance Set-Up
A. Reducing weight for Installation
Center Medallion
Flame Guide
Figure 5.2
1. Remove the front viewing door by swinging it open
approximately 90
and lift it upward until it clears the hinge
o
pins. See Figure 5.1.
2. Remove the ash pan
3. Remove the (4) internal pieces of cast iron Figure 5.2.
See Figure 5.3 and Figure 5.4 for removal instructions.
Mounting Frame
The drawing above shows the major sub components of the Accentra 52i. Take notice as to where the spring
latches are located.
19
Heat Exchanger Cover
Internal
Cast Iron
(4) pieces
(2) Spring Latches
(One on each side)
Harman® • Accentra 52i Installation Manual_R2 • 2013 -___ • 07/13
Ash Pan
Figure 5.1
3-90-00574i
Hide quick links:
Advertisement
Table of Contents
