Problem Solving Guide; Power Cut During A Wash Programme; Emergency Door Release - Miele WS 5243 Operating Instructions Manual

Problem solving guide

Power cut during a wash programme

With a short power cut:
The programme remains in the last position,
and when power is restored the following
message appears in the Display:
PROGRAMME 25
PROGRAMME STOP
THROUGH POWER CUT
Please press the Start button.
The drum rotates to the "Unclean side".
Press the button Start X button to continue
the programme.
If a disinfection programme is interrupted
or if there has been a fault during the disin-
fecting phase (wash time 2), the whole pro-
gramme will have to be repeated to ensure
that disinfection is achieved.
Cancel the disinfecting programme and re-
peat it
Turn the key switch to position D "Unlock-
ing".
At this operating level barred programmes
can be unlocked.
Press the End 7 button.
Turn the key switch to position B "Oper-
ation".
Add detergent
Press the Start X button
– the programme is repeated.
COTTONS
With an extended power cut:
Switch off the machine.
Switch off the electricity supply at the
mains switch (isolator).
Turn off the stopcocks and valves on site
for water or steam.

Emergency door release:

To remove the laundry the drain valve will
need to be opened manually and the drum
door unlocked manually on the "Unclean side"
and the drum turned to the correct position.
Contact the customer Service Department
for instructions on how to do this.
After removing the laundry ensure that all
removable parts of the machine casing are
refitted correctly in position.
25 M.-Nr. 05730940